The next big followup was Crossbow, giving full network virtualization. It never made it back into Solaris 10, and it's largely gone under the radar.
Which is a shame, because it's present in illumos (as well as Solaris 11), and allows you to construct essentially arbitrary network configuration in software. Coupled with zones you can build a whole datacentre in a box.
Putting everything together is a bit tedious, however. One of the things I wanted with Tribblix is to enable people (myself being the primary customer) to easily take advantages of the technologies, to automate away all the tedious grunt work.
This is already true up to a point - zap can create and destroy zones with a single command. No more mucking around with the error-prone process of writing config files and long streams of commands, computers exist to do all this for us - leaving humans to worry about what you want to do, not how to remember the minutiae of the how.
So the next thing I wanted to do was to have a zone that can act as a router or proxy (I've not yet really settled on a name), so you have a hidden network with zones that can only be reached from your proxy zone. There are a couple of obvious uses cases:
- You have a number of web applications in isolated zones, and run a reverse proxy like nginx or haproxy in your proxy zone to act as a customer-facing endpoint.
- You have a multitier application, with just the customer-facing tier in the proxy zone, and the other tiers (such as your database) safely hidden away.
Of course, you could combine the two.
So the overall aim is that:
- Given an appropriate flag and an argument that's a network description (ideally a.b.c.d/prefix in CIDR notation) the tool will automatically use Crossbow to create the appropriate plumbing, hook the proxy zone up to that network, and configure it appropriately
- In the simplest case, the proxy zone will use NAT to forward packets from the zones behind it, and be the default gateway for those zones (but I don't want it to do any real network routing)
- If you create a zone with an address on the hidden subnet, then again all the plumbing will get set up so that the zone is connected up to the appropriate device and has its network settings correctly configured
This will be done automatically, but it's worth walking through the steps manually.
As an example, I want to set up the network 10.2.0.0/16. By convention, the proxy zone will be connected to it with the bottom address - 10.2.0.1 in this case.
The first step is to create an etherstub:
dladm create-etherstub zstub0And then a vnic over it that will be the interface to this new private network:
dladm create-vnic -l zstub0 znic0
Now, for the zone to be able to manage all the networking stuff it needs to have an exclusive-ip network stack. So you need to create another vnic for the public-facing side of the network, let's suppose you're going to use the e1000g0 interface:
dladm create-vnic -l e1000g0 pnic0
You create the zone with exclusive-ip and add the pnic0 and znic0 interfaces.
Within the zone, configure the address of znic0 to be 10.2.0.1/16.
You need to set up IP forwarding on all the interfaces in the zone:
ipadm set-ifprop -p forwarding=on -m ipv4 znic0
ipadm set-ifprop -p forwarding=on -m ipv4 pnic0
The zone also needs to NAT the traffic coming in from the 10.2 network. The file /etc/ipf/ipnat.conf needs to contain:
map pnic0 10.2.0.0/16 -> 0/32 portmap tcp/udp auto
map pnic0 10.2.0.0/16 -> 0/32
and you need to enable ipfilter in the zone with the command svcadm enable network/ipfilter.
Then, if you create a zone with address 10.2.0.2, for example, you need to create a new vnic over the zstub0 etherstub:
dladm create-vnic -l zstub0 znic1
and allocate the znic1 interface to the zone. Then, in that new zone, set the address of znic1 to be 10.2.0.2 and its default gateway to be 10.2.0.1.
That's just about manageable. But in reality it gets far more complicated:
- With multiple networks and zones, you have to dynamically allocate the etherstub and vnic names, they aren't fixed
- You have to make sure to delete all the items you have created when you destroy a zone
- You need to be able to find which etherstub is associated with a given network, so you attach a new zone to the correct etherstub
- Ideally, you want all the hidden networks to be unique (you don't have to, but as the person writing this I can make it so to keep things simple for me)
- You want to make sure you can't delete a proxy zone if there are zones on the network behind it
- You want the zones to boot up with their networks fully and correctly configured (there's a lot going on here that I haven't even mentioned)
- You may need to configure rather more of a firewall than the simple NAT configuration
- In the case of a reverse proxy, you need a way to update the reverse proxy configuration automatically as zones come and go
Overall, there are a whole lot of hoops to jump through, and a lot of information to track and verify.
I'm about halfway through writing this at the moment, with most of the basic functionality present. I can, as the author, make a number of simplifying assumptions - I get to choose the naming convention, I can declare than the hidden networks must be unique, I can declare that I will only support simple prefixes (/8, /16, and /24) rather than arbitrary prefixes, and so on.